BULLSONE 2-Step Scratch Remover
Dispatch within 24 Hours : Your product will be shipped quickly.
Product Guarantee: Car Monkey Ensuring 100% Original Product Gurantee
Description
BULLSONE 2-Step Scratch Remover is a two-stage automotive paint correction system designed to help remove or reduce the appearance of scratches, paint marks, stains, tar, rust marks and other surface imperfections, followed by a finishing polish to restore gloss.
The BULLSONE 2-Step Compound system uses a coarser Step 1 compound for larger and medium surface defects and a finer Step 2 compound to remove swirl marks and restore the gloss of paintwork after compounding. BULLSONE’s catalogue lists Step 1 at approximately 1,500 grit / 12 microns and Step 2 at approximately 8,000 grit / 1 micron.
This two-stage approach makes the product useful for DIY car detailing, particularly when a single polishing product isn’t sufficient to correct visible surface imperfections.
Current Bangladesh-market listings describe the BULLSONE kit as suitable for all car colors and designed for removing thin/light-to-medium surface imperfections and restoring paint appearance.
Shop BULLSONE 2-Step Scratch Remover from CarMonkey BD for car-care and paint-maintenance products in Bangladesh.
8. Key Features
- BULLSONE 2-Step Scratch Remover
- Two-stage paint correction system
- Step 1: Scratch & defect removal compound
- Step 2: Finish polish
- Step 1 abrasive grade: approximately 1,500 grit
- Step 2 abrasive grade: approximately 8,000 grit
- Helps reduce surface scratches
- Helps remove paint transfer and stains
- Helps tackle tar and certain surface contaminants
- Step 2 helps reduce swirl marks
- Restores gloss after compounding
- Suitable for different car colors
- Designed for manual DIY application
- Korean automotive car-care product
How to Use
Step 1 – Prepare the Paint
- Wash the vehicle thoroughly.
- Remove dirt, dust and loose contaminants.
- Dry the paint completely.
- Work in a cool, shaded area.
Step 2 – Apply Scratch Remover
- Apply a small amount of Step 1 to the supplied/appropriate applicator or soft cloth.
- Work on a small section at a time.
- Rub the affected area using controlled, overlapping movements.
- Wipe away residue with a clean microfiber towel.
- Inspect the result.
- Repeat carefully if additional correction is required.
Step 3 – Apply Finish Polish
- Apply Step 2 to the treated area.
- Polish the surface to refine the finish.
- Remove residue with a clean microfiber towel.
- Buff gently until the paint develops an even gloss.
Related products
